Frameless Glass Balcony 

Clear

Please see images for optional extras in the Description Tab lower down on this page

Please Ensure Sizes Ordered Are Correct – Sizes Cannot be Changed Once The Order Is Processed

This item is made to order
All prices are subject to 20% VAT

Custom Size
SKU: tg0011-7 Category:
Economical, Practical and Safe
Made to order
Toughened & Laminated Glass
BS EN 6180 Compliant

* Please contact us for longer or custom lengths

Frameless Glass Balustrade

Toughened Glass Systems supply fully frameless Posi-Glaze glass balustrade systems which are economical, practical, safe and by far today’s most popular choice for garden fencing, pool fencing, decking, patio and balconies for commercial and residential use. Free deliveries in the London area for orders over 3 metres length.
We offer a range of costed options to choose from including:

  • 12mm, 15mm, 17.5mm, 21.5mm toughened or toughened laminated glass
  • Base mount or side mount (side mount option cost more). The prices displayed on this page are for the base mount option.
  • Pre-fabricated corner sections
  • End caps
  • Frosted glass
  • Tinted glass
  • Drainage blocks (fitted at every 200mm if required)
  • Handrail

It is the clients responsibly to confirm glass thickness required for building control before placing an order as each project requirements vary. As items are custom made to order, please ensure sizes and speciation are correct before placing the order. We can provide loading calculations and recommendations. Test results shown below for 17.5mm glass Tested under Horizontal Imposed Line Load. The tests were carried out in accordance with the guidance given in BS 6180 Barriers in and about buildings – Code of Practice.

Optional Extras

Measuring & Installation Guide

Base Mount -Base Channel and Glass Fitting Instructions

Base Channel and Glass Fitting Instructions

The base channel system and glass is very straightforward to fit by a builder and they can follow the simple guide below. We recommend using m12 bolts or rods to secure the base channel to the ground or flat roof.If it is installed on a flat roof,the fitter should ensure they use sealant to make the roof water tight.The base channel is supplied in maximum 3m lengths.

Side Mount – Side Channel and Glass Fitting Instructions

The side channel system and glass is very straightforward to fit by a builder and they can follow the simple guide below. We recommend using m12 bolts or rods to secure the side mount channel to the. The fitter should ensure they use sealant to make it water tight. The side mount channel is supplied in maximum 3m lengths.

Side Mount Channel Installation(Click here to view PDF)

Testimonials